Ⅰ、Purpose and Service conditions

1. Purpose
BKZ rectifier power supply device (hereinafter referred to as rectifying device) is a device working in the circuit of AC. 50~60Hz and the voltage up to 500V, which ordinarily used in changing AC. power supply into DC. 24 Voltages . It is of simple structure, user-friendly and reliable performance, which can be used as small power supply with DC. 24V for various electric equipment.。
2. Service conditions
A height above Sea-level not exceeding 1000m;
A temperature of ambient air not below -25℃ and not above +45℃;
Relative air humidity: ordinary type ≤85℃, damp and hot type ≤95℃;
In medium without risk of explosion and with too insufficient air and electric insulation dust to corrode metal and damage insulation;
In environment without water vapor and equipped with rainproof device.

Ⅱ、Structure

Rectifying device is mainly consisting of control transformer, rectifier element and JDO-1006 terminal, which can be installed in control panel or cabinet . Alternating current input end is equipped with ±5% V tapping, which can be chosen used ,
4 silicon rectifying components are constituting
single phase bridge-type full wave rectifying
circuit, the voltage of output is DC. 24V.

Ⅲ、Model

1. Model

2、Rectification device figure

Ⅳ、DC output current (A) ，dimensions and install size of rectifying device（Unit: mm）

Ⅴ、Wiring method

Terminal 1-4 accesses into AC power supply for input (terminal 1 is 0V, terminal 2, 4 are -5% and +5% V of rated input voltage, terminal 3 is rated input voltage). Terminal 5 and 6 are DC 24V for output.